+420 773 536 677 / +420 775 623 399

info-cz@masterfluidsolutions.cz

Cutting Edge Metalworking Solutions

Soluble Oil Cutting & Grinding Fluids

Geared up for production

With superior lubricity and a higher oil content, TRIM® emulsions provide a greater boundary layer between the tool and the material. TRIM Emulsions are ideal for lower, less than 600 SFPM, applications such as broaching, reaming, deep hole drilling, drilling, tapping and centerless grinding.

Emulsions work well for machining copper, yellow metals, steel alloys, cast aluminiums, wrought aluminiums and tough-to-machine titanium and nickel-based alloys.

TRIM ® E715

Multi-metal Machining Emulsion

TRIM® E715 is a high quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Suitable for machining aluminium alloys, steel alloys, nickel alloys, cast iron and yellow metals
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

Technical documentation

TRIM ® E720

Amine Free Machining & Grinding Emulsion

TRIM® E720 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to heavy duty machining jobs on aluminium and stainless steel. The inhibitor package in TRIM E720 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues.

  • Very stable formula provides long operational life with consistent performance
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Will run effectively for long periods without the need for costly additives

Technical documentation

TRIM ® E806

Magnesium and multi-metal machining emulsion

TRIM® E806 is a truly unique metalworking fluid emulsion concentrate with unparalleled metal compatibility and all round machining performance characteristics. The product is primarily designed for machining magnesium alloys used in the aerospace, automotive and general industry sectors. TRIM E806 does not tarnish the most sensitive magnesium alloys even after relatively long exposure times plus it is impervious to magnesium salt build-up in the sump – something which splits normal emulsions in a matter of days. Another problem with magnesium machining, hydrogen gas evolution, is virtually nil with TRIM E806. The product also has the lubricity and extreme pressure performance to machine other alloys commonly seen in the aerospace industry such as wrought aluminiums, stainless steels, inconel® and titanium.

  • Safe for use on even the most sensitive magnesium alloys
  • Little or no hydrogen gas evolution when machining magnesium
  • Bio package extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications

Technical documentation

TRIM ® E850

Premium Emulsion

TRIM® E850 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The optimised lubricity and extreme pressure package delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers exceptional lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

Technical documentation

TRIM ® E905

High-lubricity, extreme pressure emulsion

TRIM® E905 is a high quality, high lubricity universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. TRIM E905 has broad application in machining and grinding of a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of TRIM E905 makes it a first choice for high quality, consistent parts manufacturing.

    • A very universal product that works well in a wide range of operations
    • Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
    • Extremely hard water tolerant
    • Very low foam even at high pressures
    • Extremely fine soluble oil emulsion reduces carry-off for low total operating cost
    • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
    • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
    • Easily recycled or disposed of without special handling or equipment

    Technical documentation

    TRIM ® E909

    Amine Free Machining & Grinding Emulsion

    TRIM® E909 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. Very high levels of extreme pressure additives in this product make it particularly suitable for the heavy duty machining jobs on stainless steel and other difficult to machine alloys. The inhibitor package in TRIM E909 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues.

      • Very stable formula provides long operational life with consistent performance
      • Hard water tolerant
      • Traditional extreme pressure (EP) additives control built-up edge (BUE)
      • Fine soluble oil emulsion reduces carry-off for low total operating cost
      • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
      • Will run effectively for long periods without the need for costly additives
      •  

      Technical documentation

      TRIM ® E923

      Cutting and Grinding Fluid Concentrate

      TRIM® E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine free extreme pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations whilst still providing the excellent non-cutting characteristics normally associated with traditional, high quality emulsions from Master Fluid Solutions. The optimised lubricity and extreme pressure package matches heavy duty neat oils on difficult to machine materials such as inconel, titanium, stainless steel and high tensile strength steels.

      • Delivers exceptional lubricity and EP performance
      • Has the necessary performance to replace neat oils in certain applications
      • Very long sump life
      • Low foam even in soft water areas
      • Hard water tolerant
      • Compatible with all materials excluding magnesium
      • Easily recycled or disposed of without special handling or equipment
      • Will run effectively for long periods without the need for costly additives

      Technical documentation

      TRIM ® E950

      High Performance Machining Emulsion

      TRIM® E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

        • Delivers unparalleled lubricity
        • Very long sump life and low carry-off rates result in low operating cost
        • Low foam even in soft water areas
        • Hard water tolerant
        • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
        • Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
        • Compatible with all materials excluding magnesium
        • Easily recycled or disposed of without special handling or equipment
        • Will run effectively for long periods without the need for costly additives

        Technical documentation

        TRIM SOL ™ sf

        General-purpose Emulsion – Siloxane Free

        TRIM™ SOL SF is a very high lubricity soluble oil which is suitable for machining and grinding a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining of difficult materials such as stainless steel, inconel and titanium.

          • A very universal product that works well in a wide range of operations
          • Compatible with aluminium, all steels and yellow metals
          • Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
          • Hard water tolerant
          • Fine soluble oil emulsion reduces carry-off for low total operating cost
          • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
          • Siloxane free
          • Easily recycled or disposed of without special handling or equipment

          Technical documentation